GAS 1600
GAS 1600
My Z requires more money than I can afford to throw at it, so when my mate told me about this car it just seemed logical.
It cost me a slab of carlton cold and a tow truck to "Come and get it ASAP".
Plans for this car are a quick (like to get it on the road late next year) and cheap build to give me something to enjoy while the Z sits in modification jail.
This is where it got parked in 2003 and it stayed there till I picked it up.
Even had a tree growing through the rear bumper.
GAS1600001_1_zpsef06b188 by Garvice, on Flickr
This is after a good wash with help from my eldest.
GAS1600_001_02 by Garvice, on Flickr
GAS1600_001_03 by Garvice, on Flickr
GAS1600_001_04 by Garvice, on Flickr
GAS1600_001_05 by Garvice, on Flickr
It cost me a slab of carlton cold and a tow truck to "Come and get it ASAP".
Plans for this car are a quick (like to get it on the road late next year) and cheap build to give me something to enjoy while the Z sits in modification jail.
This is where it got parked in 2003 and it stayed there till I picked it up.
Even had a tree growing through the rear bumper.
GAS1600001_1_zpsef06b188 by Garvice, on Flickr
This is after a good wash with help from my eldest.
GAS1600_001_02 by Garvice, on Flickr
GAS1600_001_03 by Garvice, on Flickr
GAS1600_001_04 by Garvice, on Flickr
GAS1600_001_05 by Garvice, on Flickr
Last edited by Garvice on 30 Jul 2017 00:11, edited 1 time in total.
Re: GAS 1600
Rear passenger quarter was the first job to be tackled. 1/2" of bog on the lower edge gave me a couple of frights. Decided to cut out the front panel and rebuild the inner panel. Made the inner panel in 3 sections.
GAS1600_002_01 by Garvice, on Flickr
GAS1600_002_02 by Garvice, on Flickr
GAS1600_002_03 by Garvice, on Flickr
GAS1600_002_04 by Garvice, on Flickr
GAS1600_002_05 by Garvice, on Flickr
GAS1600_002_06 by Garvice, on Flickr
GAS1600_002_06 by Garvice, on Flickr
GAS1600_002_08 by Garvice, on Flickr
GAS1600_002_09 by Garvice, on Flickr
GAS1600_002_01 by Garvice, on Flickr
GAS1600_002_02 by Garvice, on Flickr
GAS1600_002_03 by Garvice, on Flickr
GAS1600_002_04 by Garvice, on Flickr
GAS1600_002_05 by Garvice, on Flickr
GAS1600_002_06 by Garvice, on Flickr
GAS1600_002_06 by Garvice, on Flickr
GAS1600_002_08 by Garvice, on Flickr
GAS1600_002_09 by Garvice, on Flickr
Last edited by Garvice on 30 Jul 2017 00:14, edited 1 time in total.
Re: GAS 1600
Front passenger quarter was next job. It was like swiss cheese in there. I still have to make the piece in the second last photo and remake the inside car section and bottom flange so I have something to weld to.
GAS1600_003_01 by Garvice, on Flickr
GAS1600_003_02 by Garvice, on Flickr
GAS1600_003_03 by Garvice, on Flickr
GAS1600_003_04 by Garvice, on Flickr
GAS1600_003_05 by Garvice, on Flickr
GAS1600_003_06 by Garvice, on Flickr
GAS1600_003_07 by Garvice, on Flickr
GAS1600_003_08 by Garvice, on Flickr
GAS1600_003_09 by Garvice, on Flickr
GAS1600_003_10 by Garvice, on Flickr
GAS1600_003_11 by Garvice, on Flickr
GAS1600_003_12 by Garvice, on Flickr
GAS1600_003_13 by Garvice, on Flickr
GAS1600_003_14 by Garvice, on Flickr
GAS1600_003_01 by Garvice, on Flickr
GAS1600_003_02 by Garvice, on Flickr
GAS1600_003_03 by Garvice, on Flickr
GAS1600_003_04 by Garvice, on Flickr
GAS1600_003_05 by Garvice, on Flickr
GAS1600_003_06 by Garvice, on Flickr
GAS1600_003_07 by Garvice, on Flickr
GAS1600_003_08 by Garvice, on Flickr
GAS1600_003_09 by Garvice, on Flickr
GAS1600_003_10 by Garvice, on Flickr
GAS1600_003_11 by Garvice, on Flickr
GAS1600_003_12 by Garvice, on Flickr
GAS1600_003_13 by Garvice, on Flickr
GAS1600_003_14 by Garvice, on Flickr
Last edited by Garvice on 30 Jul 2017 00:18, edited 1 time in total.
Re: GAS 1600
Is all of that hand formed?? Wow, excellent craftsmanship........
1973 510 2dr
1972 521 flat bed
1972 510 Wagon parts car
2009 Toyota Matrix S AWD
LOTS of 510 parts!
1972 521 flat bed
1972 510 Wagon parts car
2009 Toyota Matrix S AWD
LOTS of 510 parts!
Re: GAS 1600
Yep all hand formed. Easier then it looks, this is my first atempt at making rust repair panels.
- McShagger510
- Posts: 1821
- Joined: 26 Mar 2004 20:55
- Location: East Van, Canada
Re: GAS 1600
SKILLS!
The person with the sun in their eyes has the right of way. - my brother
'72 2dr. 510 Turbo
'73 240Z all stock
'71 2dr. 510 stock......for now
'91 Nissan truck *SOLD*
'02 TOYOTA Tacoma
'78 Kawasaki Z1-R
'84 Kawasaki GPZ750 Turbo
'99 Kawasaki ZRX1100
'72 2dr. 510 Turbo
'73 240Z all stock
'71 2dr. 510 stock......for now
'91 Nissan truck *SOLD*
'02 TOYOTA Tacoma
'78 Kawasaki Z1-R
'84 Kawasaki GPZ750 Turbo
'99 Kawasaki ZRX1100
-
- Supporter
- Posts: 6080
- Joined: 24 May 2006 12:40
- Location: Van. Isle.
Re: GAS 1600
'69 is it?
Then you must work with sheet metal in some other job?Garvice wrote:Yep all hand formed. Easier then it looks, this is my first atempt at making rust repair panels.
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs
Re: GAS 1600
It is a 1970 model (australian delivered). No I don't work with metal I'm an electrical engineer. I bought a dvd by a guy called david gardiner which gave me a few ideas, but really I just gave it a go. Much easier then it looks. I also bight a shriner stretcher and some hand tools as making radius' was taking too long by hand.
- two_68_510s
- Supporter
- Posts: 3894
- Joined: 18 Apr 2010 11:20
- Location: Ben Lomond California
Re: GAS 1600
Yeah, yeah, you say it is easy!
But I tell you you have good hand skills.
It seems easy because you have the talent.
I have seen many pieces of metal turned into pretzels by others. (myself included)
But I tell you you have good hand skills.
It seems easy because you have the talent.
I have seen many pieces of metal turned into pretzels by others. (myself included)
Joel
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
Re: GAS 1600
It's great to see nice metal work! Super satisfying for you too!
Looking at your front rocker panels I was wondering how the jack was supporting the car! Lol
BP
Looking at your front rocker panels I was wondering how the jack was supporting the car! Lol
BP
1971 Datsun 510 2 door
08 VW R32
69 BSA 650 Firebird Scrambler
Too Many Bicycles
08 VW R32
69 BSA 650 Firebird Scrambler
Too Many Bicycles
Re: GAS 1600
I'm not so sure about the "optimistic" quick and easy build statement.
Always fun nonetheless!
BP
Always fun nonetheless!
BP
1971 Datsun 510 2 door
08 VW R32
69 BSA 650 Firebird Scrambler
Too Many Bicycles
08 VW R32
69 BSA 650 Firebird Scrambler
Too Many Bicycles
Re: GAS 1600
Ha, yeah, no jack just a hoist. Sure makes life easy. Build time is optimistic, but this thing isn't going to be real pretty when done, just tidy and functional. I have a z too which is the pretty/properly built one.. Thanks for the support.
Re: GAS 1600
Got a chance to spend a bit more time on the 1600. Still not as much done as I would have liked, but I'm getting there. Will be glad to be done with the dogleg to be honest.
Had to remake the inner sill as the metal was very thin and did not allow me enough strength to weld to.
GAS1600_004_01 by Garvice, on Flickr
GAS1600_004_02 by Garvice, on Flickr
GAS1600_004_03 by Garvice, on Flickr
After I had spent considerable amount of time making the inner sill fit behind the outer sill, I had another look at the outer sill and thought, this is going to be easier to build a new one rather then fixing the holes. So I cut out a big section, should have done that from the start.
GAS1600_004_04 by Garvice, on Flickr
GAS1600_004_05 by Garvice, on Flickr
GAS1600_004_06 by Garvice, on Flickr
GAS1600_004_07 by Garvice, on Flickr
GAS1600_004_08 by Garvice, on Flickr
GAS1600_004_09 by Garvice, on Flickr
GAS1600_004_10 by Garvice, on Flickr
GAS1600_004_11 by Garvice, on Flickr
Still have to make this piece before the dogleg is all done.
GAS1600_004_12 by Garvice, on Flickr
Had to remake the inner sill as the metal was very thin and did not allow me enough strength to weld to.
GAS1600_004_01 by Garvice, on Flickr
GAS1600_004_02 by Garvice, on Flickr
GAS1600_004_03 by Garvice, on Flickr
After I had spent considerable amount of time making the inner sill fit behind the outer sill, I had another look at the outer sill and thought, this is going to be easier to build a new one rather then fixing the holes. So I cut out a big section, should have done that from the start.
GAS1600_004_04 by Garvice, on Flickr
GAS1600_004_05 by Garvice, on Flickr
GAS1600_004_06 by Garvice, on Flickr
GAS1600_004_07 by Garvice, on Flickr
GAS1600_004_08 by Garvice, on Flickr
GAS1600_004_09 by Garvice, on Flickr
GAS1600_004_10 by Garvice, on Flickr
GAS1600_004_11 by Garvice, on Flickr
Still have to make this piece before the dogleg is all done.
GAS1600_004_12 by Garvice, on Flickr
Last edited by Garvice on 30 Jul 2017 00:23, edited 1 time in total.
Re: GAS 1600
Nice! And I love the picture of the repair rocker against what looks like a perfect red driver's seat.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
Re: GAS 1600
Actually it's a pretty crappy maroon passenger seat , but that is only because I'm on the other side of the world.
Thanks by the way.
Thanks by the way.