Lets see some welding and fabrication pics!
Re: Lets see some welding pics!
Another low-amp job from my L20BT project. This is the throttle wheel to actuate the SU, but I needed to weld it to another piece that itself mounted to the throttle shaft.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
Re: Lets see some welding pics!
There are tricks, but not with machine settings. I didn't use pulse or anything like that, just modulated the amps with the foot pedal. The hardest thing is getting them tacked. If you try to light up on the actual razor blade the hi freq will just blow the edge away. The trick is to clamp them to something (I used an aluminum block), then light up on the block and carefully move over to the blades. Also, if you start blowing a hole in them, you are pretty much done. There is no stopping and restarting, you must do the whole thing in one pass.goichi1 wrote:What were all of your other settings? initial arc? I know I can turn mine down but havent tried, I think I have to access the more hidden menus to do that. I have heard that's how people weld aluminum cans together.....I want to try....
I tried some cans, but didn't really figure it out till about half way though, and by then I had already burned a couple of holes in them. Next time I have so cans around I'm going to try again though.
Duke Schimmer
'72 2-Door 510
"Simplify and add lightness."
'72 2-Door 510
"Simplify and add lightness."
- Track Junky
- Supporter
- Posts: 397
- Joined: 14 Feb 2008 02:18
- Location: Chicago Ill.
Re: Lets see some welding pics!
One from the other day. This is the first few welds for my upcoming project. Double wishbone IRS.
Scott.
Scott.
Re: Lets see some welding pics!
Got the wife welding today. Building a safari rack for the jeep. Good that shes sharing interest.
'69 2dr KA24DET
okayfine wrote:You could turn the car into a Transformer. Just a matter of money and talent. Front-hinge hood would be easier, but you still need money. And talent.
Re: Lets see some welding pics!
Damn phone! Sorry ill fix it soon.
'69 2dr KA24DET
okayfine wrote:You could turn the car into a Transformer. Just a matter of money and talent. Front-hinge hood would be easier, but you still need money. And talent.
Re: Lets see some welding pics!
Our compost bucket is steel, and despite paint and rust protection under that, it continues to rust due to the moisture in the compost. So I made an aluminum version.
Still needs handles, which I'll rob from the steel bucket before I kick it to the curb. Nothing really to save for another project, and I always save stuff for other projects (real, imagined, or unknown).
Still needs handles, which I'll rob from the steel bucket before I kick it to the curb. Nothing really to save for another project, and I always save stuff for other projects (real, imagined, or unknown).
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
Re: Lets see some welding pics!
Although not (yet) a welding project, I did machine up a couple replacement nuts to weld onto the transmission tunnel. One stripped out, and will need to be replaced one day on the Bronze. So I made a pair, and blew the dust off my little hobby lathe.
Turned out pretty good, I placed then next to the Greg Terry nuts on the floor and look identical. Felt good to use the lathe for a change.
Byron
Turned out pretty good, I placed then next to the Greg Terry nuts on the floor and look identical. Felt good to use the lathe for a change.
Byron
- Attachments
-
- DSC01519 (Medium).JPG (261.49 KiB) Viewed 4444 times
-
- DSC01520 (Medium).JPG (259.08 KiB) Viewed 4444 times
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: Lets see some welding pics!
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
- PoorMtnKid
- Supporter
- Posts: 1219
- Joined: 28 Aug 2010 14:43
- Location: Las Vegas NV
Re: Lets see some welding pics!
I need one of these my self, how hard would it be to spin up another?Byron510 wrote:Although not (yet) a welding project, I did machine up a couple replacement nuts to weld onto the transmission tunnel. One stripped out, and will need to be replaced one day on the Bronze. So I made a pair, and blew the dust off my little hobby lathe.
Turned out pretty good, I placed then next to the Greg Terry nuts on the floor and look identical. Felt good to use the lathe for a change.
Byron
looking for pass. side arm rest
Re: Lets see some welding pics!
Turning them up is not hard at all - maybe 30 minutes to set up the first one - 10 minutes each afterwards.
Time is my greatest enemy - I'll try to make you a couple next time I'm out there.
Byron
Time is my greatest enemy - I'll try to make you a couple next time I'm out there.
Byron
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: Lets see some welding pics!
Since this thread's been asleep for far too long, who needs a diamond-plate lunch box with quarter-turn fasteners? My wife.
Magnets glued to the underside of the top panel hold the steel key I made, shown in the next picture under the handle.
Magnets glued to the underside of the top panel hold the steel key I made, shown in the next picture under the handle.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
Re: Lets see some welding pics!
Ooooh, what's that I smell........industrial cottage industry!okayfine wrote:Since this thread's been asleep for far too long, who needs a diamond-plate lunch box with quarter-turn fasteners? My wife.
Magnets glued to the underside of the top panel hold the steel key I made, shown in the next picture under the handle.
Re: Lets see some welding and fabrication pics!
It's been a while since this thread got an addition - and it took e a while to find it so I added "fabrication" into the title....
Been busy this past week completing a roll cage for a friend of my shop mate. These guys have been running the Chumpcar series for a few years now in a mark II Golf, but want to step up their game. They have been very competitive on the west coast to date, so the build has experienced drivers behind the program. This is a mark IV car and will be turbocharged. The team was quite a professional lot to work with. Weight was a key factor, so a minimal cage to meet the various rule books was devised, fitting Chumpcar (which is as basic as I've ever seen), SCCA and CACC.
The door bars are currently just set in place, as the seat mounting has not yet been determined. The team runs many endurance events, - 24 and 36 hour events! There are 4 drivers, 5 for the longer enduros.
Cage turned out well. The car has a lot of curves, the A pillar bars were a real challenge getting them "right" Adding to tha - the A pillar bars needed to support the dash bar in exactly the right spot so that all items that were in the stock dash mount could be utilized within the cage design. I have to admit thought - this is a pretty big "small" car. Lots of room for the occupants.
Byron
Been busy this past week completing a roll cage for a friend of my shop mate. These guys have been running the Chumpcar series for a few years now in a mark II Golf, but want to step up their game. They have been very competitive on the west coast to date, so the build has experienced drivers behind the program. This is a mark IV car and will be turbocharged. The team was quite a professional lot to work with. Weight was a key factor, so a minimal cage to meet the various rule books was devised, fitting Chumpcar (which is as basic as I've ever seen), SCCA and CACC.
The door bars are currently just set in place, as the seat mounting has not yet been determined. The team runs many endurance events, - 24 and 36 hour events! There are 4 drivers, 5 for the longer enduros.
Cage turned out well. The car has a lot of curves, the A pillar bars were a real challenge getting them "right" Adding to tha - the A pillar bars needed to support the dash bar in exactly the right spot so that all items that were in the stock dash mount could be utilized within the cage design. I have to admit thought - this is a pretty big "small" car. Lots of room for the occupants.
Byron
- Attachments
-
- IMG_2046 (Medium).JPG (236.52 KiB) Viewed 4215 times
-
- IMG_2042 (Medium).JPG (199.08 KiB) Viewed 4215 times
-
- IMG_2044 (Medium).JPG (148.03 KiB) Viewed 4215 times
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: Lets see some welding and fabrication pics!
Here’s the dash bar comparison - factory vs built into the cage.
- Attachments
-
- IMG_1886 (Medium).JPG (215.36 KiB) Viewed 4215 times
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: Lets see some welding and fabrication pics!
The Chumpcar rule book allows one set of bars to protrude through the fire wall, so the team chose the strut towers as this is a known "soft spot" for this chassis design. But this meant punching holes through the pressurized cowl vent....more to come. And yes this car needs to run endurance events in the rain.
The driver’s side strut tower brace required a bend to clear the wiper linkage - this bar was a challenge.
The driver’s side strut tower brace required a bend to clear the wiper linkage - this bar was a challenge.
- Attachments
-
- IMG_2033 (Medium).JPG (91.14 KiB) Viewed 4212 times
-
- IMG_2037 (Medium).JPG (198.48 KiB) Viewed 4213 times
-
- IMG_2034 (Medium).JPG (162.64 KiB) Viewed 4213 times
Love people and use things,
because the opposite never works.
because the opposite never works.