WTT Give a core take a core Richmond bc

Post your forsale and wanted ads
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

WTT Give a core take a core Richmond bc

Post by RMS »

I want your cores and take offs : motors, body plastic and specially fasteners. sometimes I can even give scrap value for the weight.

some of you know I have a large selection of 510 take offs, that I provide a home for unwanted parts and that I'm willing to give, trade or sell for cheap just to see a car on the road.

however there are many local guys who don't know. they could be looking for a spare set of stock struts to modify or just need them for mock up. Someone could be thinking about running a head through a band saw to see for themselves just how much meat there is or they could be doing out a Man cave and want some L16 end tables. worse their wife could be complaining that she cant park her car in the garage because of the pile of rusted out Datsun parts strewn across the floor. Ya I'll come and pic that up save your marriage and help another local guy get his car on the road. :P

I do charge a high core fee on electrics like wiper motors switches and turn signals (if you don't want to give me your broken one).

please don't come to me expecting to find cheap parts in better condition than what you already have.....I got nothing worth selling on Ebay but I probably got what you need to get rolling.

so don't scrap those "junk parts" they could be gold to someone

cheers
Robyn

Local pic up only (but hey you want to send me parts im good with that) :wink:
Last edited by RMS on 25 Oct 2015 18:47, edited 3 times in total.
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
PoorMtnKid
Supporter
Posts: 1219
Joined: 28 Aug 2010 14:43
Location: Las Vegas NV

Re: Give a core take a core Richmond bc

Post by PoorMtnKid »

I have a damn stock r160 that is collecting dust. Too bad I was not local I would deliver it tonight!
looking for pass. side arm rest
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: Give a core take a core Richmond bc

Post by RMS »

thanks for the thought PoorMtKid. something like that stock r160 will never fetch high bids on Epay but would be gold to an out of towner who broke something at auto X or to a guy wanting to rebuild/ up grade but didn't want their car being off the road.

ive been able to help a few guys out with this add. managed to trade off a 4spd and used fuel line for some stock 200sx rims and a couple pairs of struts

Also I had a guy send me an email asking for a l16 torque converter :shock:

still hoping someone will want a couple l16 blocks for end tables/ coffee table and a few struts to make lamps out of or w.h.y.

im still looking for fasteners (Rheis needs to get his car back together) and I seem to have dozens of right hand rear tail lights but no lefts? junk wire harnesses are needed..... plugs can be saved
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: Give a core take a core Richmond bc

Post by RMS »

Image
started organizing one of my storage containers yesterday and made an inventory of tires. besides the 13 Yokohama rally tires(not for sale) I have good incomplete sets of used tires that need mates:
2x perelli 175 70r13s,
2x fulda 165 sr13s,
2x bfg 175 70r13,
2x bfg 195 60r13,
2x micheline 175 60r14
I also have a few new never mounted singles
1x aspec AX-631 185 60 r14
1x yokohama A001-R 180/70Hr13
1x yokohama winter radial #847 185 70 r13
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
LifelikeStatue
Posts: 20
Joined: 08 Feb 2013 12:16
Location: Surrey, BC

Re: Give a core take a core Richmond bc

Post by LifelikeStatue »

I PM'd you about a hood but if you don't have one I'll swap my ugly ass trunk lid for the BFG 195's you have.
It is better to remain silent and be thought a fool than to open your mouth and prove it.
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: Give a core take a core Richmond bc

Post by RMS »

sorry man I didn't get a pm. the bfgs have lots of tread on the outside and getting low on the inside from massive camber. trade for w.h.y. no prob. I might have a hood as well.

send me a pm with your # and a time to call. then we deal :mrgreen:

cheers
Robyn
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: Give a core take a core Richmond bc

Post by RMS »

got a pm about some parts went back the next day to grab the # to call and the message was gone?

send again and we will try to make it happen
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
toylet
Supporter
Posts: 515
Joined: 07 Sep 2007 20:54
Location: Mesa AZ

Re: Give a core take a core Richmond bc

Post by toylet »

I need 70-73 510 lock set?
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: Give a core take a core Richmond bc

Post by RMS »

sorry man
wish I still had small shippable parts to send south with the canadian dollar so low.
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: Give a core take a core Richmond bc

Post by RMS »

I would post my # but my wind phone does not work in the the yard and the only other # I have is a work line.

so if you need a core or want to give a core please send a pm with your # and post that a pm was sent

sorry for any inconvenience

Robyn
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: Give a core take a core Richmond bc

Post by RMS »

Big thanks out to all the guys who have participated in giving and taking cores. I hope to see many new Datsuns on the road this summer.
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

L series for sale or trade

Post by RMS »

L series for sale or trade

Long block cores clutch to pump :

2x L20b u67 $250each

1x L20b w58 $200

1x L18 $200 stuck when pulled

1xL16 $150

Short block (no head):

1x L20b lots of cross hatch ran it for 5000k with a dent on no4 piston from droped valve . $150

1x L20b block rods crank. small dent on deck @ no 2 $50

10x L16 $50 with or with out crank

heads

1x u67 B, offers

1x u60 towers no cam, offers

1x 210 closed offers

2x 210 open, offers

2x w58 no cams
Last edited by RMS on 29 Oct 2015 18:43, edited 2 times in total.
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
Byron510
Moderator
Posts: 12658
Joined: 01 Jul 2003 23:06
Location: Maple Ridge, BC

Re: WTT Give a core take a core Richmond bc

Post by Byron510 »

PM'd on an L18 Long block and a closed chamber head :D

Byron
'
Love people and use things,
because the opposite never works.
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: WTT Give a core take a core Richmond bc

Post by RMS »

Byron your L18 comes with all its stock accessories: fan, pulleys,fan belt, water pump, fuel pump, carb, intake, valve cover, spark plugs, dizzy, alt, flywheel, clutch, and cover, pan, mounts........
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
User avatar
Byron510
Moderator
Posts: 12658
Joined: 01 Jul 2003 23:06
Location: Maple Ridge, BC

Re: WTT Give a core take a core Richmond bc

Post by Byron510 »

Sweet. + one of those closed chanber 210 heads as well :D

Byron
Love people and use things,
because the opposite never works.
Post Reply