WTB L20B cam

[farmer_fred]

I am building an L16 w/flat-top pistons and an A87 open-chambered head and could use something a little bumpier than the stock cams I have on hand.

TIA

[timmer510]

Try Colt Cams and tell them what you are looking for and they will be able to set you up for a reasonable price.

http://www.coltcams.com/

Cam Profiles they offer
http://www.coltcams.com/flash/index.html

[farmer_fred]

Thanks for that tip. I have used Colt regrinds in my Moto Guzzis before and so far so good.

But I was really just looking for an OEM used L20B cam to drop in this motor. From the measurements I have made on the three cams I have here, one corresponds to what my factory book lists for the L14, one specs out to what stock smog PL510s had, and one is an unknown regrind with a little bit more lift (.310" or so) but a really small base circle.