two door. Door handle rod question
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
two door. Door handle rod question
Ok so the rod that connects to the door handle is the one I'm referring too in the picture. Is there a difference in lengths between a 4 door and a two door? My two door car unfortunately did not come with them. I got one from a buddy who has a 4 door and ran into a slight problem. When the rod is attached to the plastic clip on the door handle and fully bolted at the bottom where the rod is mounted I can't move the handle up. I had to loosen the mounting screw at the bottom of the rods mount to get the handle to engage. With the bolt barely threaded on was the only way I can get the handle to lift up and open the door. The next thing I noticed was the handle doest fully disengage. It stays slightly up in the open position due to the length I believe. Thanks in advance any info will be appreciated.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
Re: two door. Door handle rod question
could a guy not tap the thread and trim the excess ?
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
Re: two door. Door handle rod question
2dr and 4dr have exact same part number. you have a problem with your latch. check the little spring inside latch. they break
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: two door. Door handle rod question
Ah ok I will have too check that out. I was hoping It wasn't involving me having to pull that whole thing out.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
Re: two door. Door handle rod question
I had same issue went to a hardware store and found a spring that fit, working good now. yes you will have to remove the latch assembly from door.
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: two door. Door handle rod question
Cool man thanks for the input. Looks like thats what I will be doing today. I still need to get another rod for the drivers side door. Gonna grab and extra spring to be safe for that door when I get to it.toylet wrote:I had same issue went to a hardware store and found a spring that fit, working good now. yes you will have to remove the latch assembly from door.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: two door. Door handle rod question
Is this the spring your referring too?toylet wrote:I had same issue went to a hardware store and found a spring that fit, working good now. yes you will have to remove the latch assembly from door.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
Re: two door. Door handle rod question
no there is a spring (missing) that wraps around the center circle thing.. look at the other door latch that works for reference
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: two door. Door handle rod question
toylet wrote:no there is a spring (missing) that wraps around the center circle thing.. look at the other door latch that works for reference
Sorry man neither door latch works or has the missing spring. So I have no idea of what the spring looks like or exactly how it gets mounted. Thanks either way for the reply.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: two door. Door handle rod question
Hell yeah !!! thanks man!!!toylet wrote:Yess sirrr
https://www.zeddsaver.com/products/copy ... lant-decal
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !