Door Rubber Attachment
Door Rubber Attachment
Do I use a adhesive to attach rubber on the doors both inner and outer?
Re: Door Rubber Attachment
inner and outer?
The doorseals attach both in the channel and freely via weather stripping adhesive. Install them into the channel and make sure the placement is correct. Then follow the manufacturers directions for applying the adhesive. You do not simply squirt it on and hold it. You have to apply thin layers to both the door and the seal and let it tack up. Then you apply some to the door and stick the seal to the door and it will stay where it's placed.
The doorseals attach both in the channel and freely via weather stripping adhesive. Install them into the channel and make sure the placement is correct. Then follow the manufacturers directions for applying the adhesive. You do not simply squirt it on and hold it. You have to apply thin layers to both the door and the seal and let it tack up. Then you apply some to the door and stick the seal to the door and it will stay where it's placed.
Re: Door Rubber Attachment
inner door glass channel
I bought from tracy
wondering
if it needs to be cut for corner placement also
I bought from tracy
wondering
if it needs to be cut for corner placement also
Re: Door Rubber Attachment
depends on how much paint is in the channel. if the paint is thick the glass will bind @ the corner folds. 3 out of 4 seem fine. I have not glued my felts or cut the corners if I find they do not relax I may do so latter
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
Re: Door Rubber Attachment
I definitely over glued
and this
problem
and this
problem
- Attachments
-
- Photo on 5-30-17 at 4.29 PM #2.jpg (164.47 KiB) Viewed 3074 times
-
- Photo on 5-30-17 at 4.29 PM.jpg (169.1 KiB) Viewed 3074 times
Re: Door Rubber Attachment
The stick out too much
Re: Door Rubber Attachment
you could try
McShagger510 wrote:RMS wrote:to train the seal.
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: Door Rubber Attachment
Its really difficult to see what you got going on with those photos. Can you post some photos of the opposite side so we can see how the seal is installed. Hard to tell, but from the way seal is slanting towards the inside of the car you might have it installed incorrectly. Again hard to tell from those photos but I believe thats why the top corner might be causing you a problem.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !