WTB 71-73 front seat belt reciever

Post your forsale and wanted ads
Post Reply
User avatar
Byron510
Moderator
Posts: 12658
Joined: 01 Jul 2003 23:06
Location: Maple Ridge, BC

WTB 71-73 front seat belt reciever

Post by Byron510 »

As noted, I'm looking for 1 front seat belt receiver (lower part with the button/latch) for 71-73 style seat belt. I put a set in my brothers car but one of the button/release mechanisms is broken. I used a rear belt base but it's far too short to be used up front. A local Vancouver/BC part would be great if you have one - thanks.

Byron
Love people and use things,
because the opposite never works.
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: WTb 71-73 front seat belt reciever

Post by RMS »

I will have a look but I think all I have is 68-70 belts
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
deano510
Posts: 245
Joined: 16 Dec 2013 18:42
Location: NorCal

Re: WTS 71-73 front seat belt reciever

Post by deano510 »

I replaced all of the stock front seat belts with Seat Belt Planet belts on my '71 2 dr. You can have any or all for the cost of shipping from 94519.

Dean
gzentas510@outlook.com
WxMan
Supporter
Posts: 227
Joined: 22 Feb 2013 08:38
Location: Victoria, BC

Re: WTS 71-73 front seat belt reciever

Post by WxMan »

Hey Bryon,

This one is from my '72. I replaced all of the front belts with Datsport belts last fall. It's all yours if you want it.

Russ.

Image
The company motto seems to be "We're not happy 'till you're not happy."
User avatar
Byron510
Moderator
Posts: 12658
Joined: 01 Jul 2003 23:06
Location: Maple Ridge, BC

Re: WTB 71-73 front seat belt reciever

Post by Byron510 »

Good morning Ryan,
Thanks for the offer, however I need the belt receiver with the center push button style. I found The below photo on the net of the style I'm looking for, only I need the one front reciever.
IMG_9162.JPG
IMG_9162.JPG (78.94 KiB) Viewed 2314 times
Dean, thank you for your response, is the unit you have the type pictured by chance?

Thanks for the replies guys.

Byron
Love people and use things,
because the opposite never works.
User avatar
RMS
Supporter
Posts: 1921
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: WTB 71-73 front seat belt reciever

Post by RMS »

I did some digging and all I could come up with in a "push type" is from a 720.
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
RONSLYCHUK
Supporter
Posts: 776
Joined: 12 Sep 2004 19:42
Location: Abbotsford B.C.

Re: WTB 71-73 front seat belt reciever

Post by RONSLYCHUK »

Hey Byron,I think I have what you want. I will
check after work today.
Post Reply