I have a long history with Datsuns and Nissans in the UK. I have what I have been told is VG30s engine and am after some advice. It was taken out of a Nissan Cedric 1986. I have been told that it is a very rare and sought after engine due to the distributor and the carburettor. Apparently it is an import from Saudi Arabia (due to the distributor) and the handbook I have is in both English and Arabic.
The engine is in good working order and I was just wondering if anyone knew anything about this engine, or if anyone was interested in buying it as I do not need it.
Thanks
Naomi
New Member
-
- Supporter
- Posts: 6080
- Joined: 24 May 2006 12:40
- Location: Van. Isle.
Re: New Member
I know of them. The engine isn't rare but the distributor is a good replacement for our CAS VG30E if wanting to run a four barrel carb on home made intake. IIRC the carb is a large 2 barrel.
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs
Re: New Member
Hello Naomi, and welcome to The Realm. As mentioned above, you may be able to sell the distributor, and perhaps the intake system, but the entire engine would probably only be suitable for another UK buyer interested in a carb'ed VG. Since we got VGs here in the US, it'd only make sense to buy the necessary bits and bobs.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
- KiKiIchiBan
- Supporter
- Posts: 508
- Joined: 26 Feb 2014 23:46
- Location: London, England
Re: New Member
Hello Naomi, welcome.
Do you have a 510 or just on here to sell the engine?
Do you have a 510 or just on here to sell the engine?
My P510 Bluebird SSS Coupe www.the510realm.com/viewtopic.php?t=26929
https://www.instagram.com/kikiichiban/
https://www.youtube.com/channel/UCBP1x8z2IBvfs-MQH2Gc73Q/featured
https://www.instagram.com/kikiichiban/
https://www.youtube.com/channel/UCBP1x8z2IBvfs-MQH2Gc73Q/featured
Re: New Member
Hi,
I appreciate that this is a long shot given that this thread is nearly two years old, but I am also in the UK and am after a VG30S upper intake manifold to do a carb conversion on the VG33E that will be going into my Datsun Roadster.
Naomi, if you're out there, please get in touch.
07753 335 604
I appreciate that this is a long shot given that this thread is nearly two years old, but I am also in the UK and am after a VG30S upper intake manifold to do a carb conversion on the VG33E that will be going into my Datsun Roadster.
Naomi, if you're out there, please get in touch.
07753 335 604
Re: New Member
Hi
I know this is a old post but you never know!
Do you still have the VG30S engine or part of it?
Also interested in the english/arabic manual
Regards
Frank
I know this is a old post but you never know!
Do you still have the VG30S engine or part of it?
Also interested in the english/arabic manual
Regards
Frank
- KiKiIchiBan
- Supporter
- Posts: 508
- Joined: 26 Feb 2014 23:46
- Location: London, England
Re: New Member
Hi Frank, if Naomi doesn't reply on here, I can send her a message for you. I'm in the UK but about 170 miles (that's far in the UK) away so can't help I any other way.
My P510 Bluebird SSS Coupe www.the510realm.com/viewtopic.php?t=26929
https://www.instagram.com/kikiichiban/
https://www.youtube.com/channel/UCBP1x8z2IBvfs-MQH2Gc73Q/featured
https://www.instagram.com/kikiichiban/
https://www.youtube.com/channel/UCBP1x8z2IBvfs-MQH2Gc73Q/featured