Noob build
- two_68_510s
- Supporter
- Posts: 3894
- Joined: 18 Apr 2010 11:20
- Location: Ben Lomond California
Re: Noob build
Cool, I mean hot.... never mind. I hope you can reach all the fasteners.
Joel
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
Re: Noob build
Fire, we have fire!
https://www.youtube.com/watch?v=vJ-kLqP ... e=youtu.be
First drive
https://www.youtube.com/watch?v=scLMloY ... e=youtu.be
https://www.youtube.com/watch?v=vJ-kLqP ... e=youtu.be
First drive
https://www.youtube.com/watch?v=scLMloY ... e=youtu.be
Re: Noob build
What a day that was! Turns out the timing was off and now it runs beautifully...
Finished up running the wiring on the drivers side, now just have to terminate everything into the fuse panel... so much fun to come!
Finished up running the wiring on the drivers side, now just have to terminate everything into the fuse panel... so much fun to come!
-
- Posts: 87
- Joined: 24 Nov 2007 19:31
Re: Noob build
Right on Frank. texted you yesterday when I was out in Butters was going to drop by.
Tried the new number you sent. Drop me a line.
Dan
Tried the new number you sent. Drop me a line.
Dan
Re: Noob build
Changed jobs and lost your numbers. Give me a shout 431-777-6648 I’m around most of this weekDanthewire wrote: ↑23 Jul 2018 10:32 Right on Frank. texted you yesterday when I was out in Butters was going to drop by.
Tried the new number you sent. Drop me a line.
Dan
Re: Noob build
What fun wiring can be... Only one more of these relay holders to go and that should be that.
Re: Noob build
Fun
Does Pico make that relay / fuse holder? It's a good idea for these add on items.
Byron
Does Pico make that relay / fuse holder? It's a good idea for these add on items.
Byron
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: Noob build
They unfortunately do not. I looked for a long time and found this one on eBay, I’m using two of them. There wasn’t anything suitable at the local parts stores that carry Pico
Re: Noob build
Wiring is almost done, a few small things to tidy up. The gauges all work and look great, just need to finalize horn, defrost, hazard and 12V button locations. Still need a custom piece to mount the heater controls to, once that's done the dash can be buttoned up.
Re: Noob build
Who made that dash for you? It looks great.
ice D
ice D
Re: Noob build
Ahhhh, your wiring brings back memories when doing my own.
I saw your car two owners prior, when it was full on race mode. You’ve come a long ways with it, nice job your doing on its resurrection.
I saw your car two owners prior, when it was full on race mode. You’ve come a long ways with it, nice job your doing on its resurrection.
Re: Noob build
Sure could have used an extra hand had I known
And thank you, I'm glad it's being appreciated. It's a lot of work but finally starting to come together. Hope to have it done by Xmas... How much of the cars history do you know?
Re: Noob build
Done by Christmas, sounds like your closing in. Living in Victoria can you drive it in december?
I met Lou, prior to Don, but at the time didnt know Lou owned it until I visited with Don. Im most certain I know nothing more than you. I no longer recall specifically where Lou came from, but it was east/NE USA. Lou closed up his busines a couple years ago, it was in my childhood stomping grounds.
I met Lou, prior to Don, but at the time didnt know Lou owned it until I visited with Don. Im most certain I know nothing more than you. I no longer recall specifically where Lou came from, but it was east/NE USA. Lou closed up his busines a couple years ago, it was in my childhood stomping grounds.
Re: Noob build
Headliner and glass are back in