Name that Strut and Caliper !!!!

Post by **72nismo1** » 28 Mar 2010 00:51

Can anyone identify these rotors and calipers?? They were on a Datsun 510.

This is a New 280zx rotor and the mystery Rotor.

ANYBODY???????

Post by **thisismatt** » 28 Mar 2010 01:06

Looks like maybe late 70's 710 or 810.

...and if those are new 280zx rotors, why aren't they vented?

JDM510 · Post by **JDM510** » 28 Mar 2010 02:02

those look like rears... the new ones

indy510 · Post by **indy510** » 28 Mar 2010 08:12

Early 710 calipers look identical to PL510 calipers........ Late 710 calipers (post 09/75) have pins holding the pads and dual pistons

I have no idea what struts or calipers you have.............. maybe this will help:

From left to right: shortened 510 strut... . .... stock 710 strut.... .... stock 280zx strut

Post by **datzenmike** » 28 Mar 2010 08:55

Much better picture!

It's definitely not from a 610 or the '77-'79 200sx but could be from a 710 built after '75 and is also consistent with ones from a '78-'79 620, S110 and the '80-'83 720 2wd. The piston diameter would have to be measured to be sure.

Likely from the 710.

Post by **Three B's Racing** » 02 Apr 2010 10:35

That is not a ZX rotor, ZX rotors are vented. I think it may be one of the following 240/260 or 280 Z setup.

Post by **hang_510** » 02 Apr 2010 11:00

200sx (S110???) are non vented.

ill compare to my set later.

The 510 Realm

Name that Strut and Caliper !!!!

Name that Strut and Caliper !!!!

Re: Name that Strut and Caliper !!!!

Re: Name that Strut and Caliper !!!!

Re: Name that Strut and Caliper !!!!

Re: Name that Strut and Caliper !!!!

Re: Name that Strut and Caliper !!!!

Re: Name that Strut and Caliper !!!!