moar good videos :P

[510rob]

I wonder what grade that was, some of the shots made it look quite steep. Lots of hours & $$ in those restorations.

...and U.P. restored engine 4014. I can't imagine the cost to do that. Cool they did it, but I.5 million pounds weight and who knows how many millions to complete the restoration.

[510rob]

The Story Behind Pete Aardema and Kevin Braun's 920 HP - V12 Engine ---> https://www.youtube.com/watch?v=gP5213NlQog

[bertvorgon]

Seeing as how only 5 or 6 of us heathens acknowledged Christmas and not 1 Happy New Year (maybe speaks to the sentiment in the World), time to bump that thread away.

This is not auto related, no million HP engines or another drifting video of naturally aspirated vs another electric something, this is a snap shot of our wonderful Province.

it's just a quick video of when Matt and I went to explore that little known suspension bridge. Many years ago when Matt...and it was Matt, did our driving video's, it was a lesson in futility at the time of so many different video formats, I threw in the towel. I finally sat down with this video, was able to trim it a bit and threw a token title on.I feel like Cecil B. DeMille.

This summer, should we ever have this winter end, I would not mind taking a small group back there and hike in again, maybe not in the 510's, not sure how comfortable I would be leaving such nice hardware parked along a highway.

Matt does swing around towards the end and scan the river, up and down. That wind is so strong, video does not really show it, but, there is a reason I keep my arm on the cable. Hope you enjoy.

https://vimeo.com/672454630

[gooned]

That’s a great video from Keith & Matt!

This just popped up on another site, pretty wild.

https://youtu.be/Y9Kx89J_EcI

[Byron510]

The Story Behind Pete Aardema and Kevin Braun's 920 HP - V12 Engine ---> https://www.youtube.com/watch?v=gP5213NlQog

If you like what these guys can build from scratch, starting with a clean sheet of paper, you aught to see what these two can do when given the constraints of an 80 year old block and still make it work - even when the organization your running in is trying everything they can do - to stop them…

You have to check this out! I thoroughly enjoyed this when it was sent to me but my died-in-the-wool, hot rod father;

https://m.youtube.com/watch?v=DqopaEr4Er4

And then here’s part 2 of that series

https://m.youtube.com/watch?v=T29HFhrbT_s

Byron

[510rob]

More good stuff. Ingenious fellows! The sound of their motors is great!

https://youtu.be/yWuMhRWhecM?t=89

https://www.youtube.com/watch?v=-qJI5cYSGh4

[icehouse]

So crazy! I mean I would just push that old engine into the river and go to pick and pull and get a K24 Honda engine but that's just me. different strokes for different folks. I love watching them be silly though haha.

The Story Behind Pete Aardema and Kevin Braun's 920 HP - V12 Engine ---> https://www.youtube.com/watch?v=gP5213NlQog

If you like what these guys can build from scratch, starting with a clean sheet of paper, you aught to see what these two can do when given the constraints of an 80 year old block and still make it work - even when the organization your running in is trying everything they can do - to stop them…

You have to check this out! I thoroughly enjoyed this when it was sent to me but my died-in-the-wool, hot rod father;

https://m.youtube.com/watch?v=DqopaEr4Er4

And then here’s part 2 of that series

https://m.youtube.com/watch?v=T29HFhrbT_s

Byron

[Byron510]

So crazy! I mean I would just push that old engine into the river and go to pick and pull and get a K24 Honda engine but that's just me. different strokes for different folks. I love watching them be silly though haha.

The Story Behind Pete Aardema and Kevin Braun's 920 HP - V12 Engine ---> https://www.youtube.com/watch?v=gP5213NlQog

If you like what these guys can build from scratch, starting with a clean sheet of paper, you aught to see what these two can do when given the constraints of an 80 year old block and still make it work - even when the organization your running in is trying everything they can do - to stop them…

You have to check this out! I thoroughly enjoyed this when it was sent to me but my died-in-the-wool, hot rod father;

https://m.youtube.com/watch?v=DqopaEr4Er4

And then here’s part 2 of that series

https://m.youtube.com/watch?v=T29HFhrbT_s

Byron

It’s all about staying in class rules. In this case, these guys were shooting for the fastest model A engine.
I love the clamp around the block - to hold it together! That’s awesome.
-Then building a 3 main block into a 5 main..
- The bit about shorting the block by an inch…
And then being outlawed and saying - screw you, there’s more than one way to…!
It’s and awesome story, was fun to watch for sure.
Byron

[510rob]

When it rains, it pours, OR, YouTube makes some interesting recommendations?

https://www.youtube.com/watch?v=bifbiZGx6Wo

[Byron510]

Agreed, there are some Frankenstein engines out there. The Cleavland head sections on a 300 inline 6 is definitely one of them. But here is a more mainstream option my father sent me a year ago. As a machinist, this stuff just is right up my alley.
Rob, thanks for making it a available to us. It’s just cool.

https://m.youtube.com/watch?v=KK5Z1VNqasA

Byron

[510rob]

https://www.youtube.com/watch?v=xOsBQKJTL18

[gooned]

Quite the crossection of cars.

[510rob]

I like seeing the old Chrysler products in that wild mix of contraptions.

[510rob]

going back to the crazy home-made engines, I found some old pictures of a V12 Buick that a friend put together years ago...

V12 - 1 - Ray and Phil Baker.jpg (86.69 KiB) Viewed 1314 times

V12 - 2 - Ray and Phil Baker.jpg (85.4 KiB) Viewed 1314 times

V12 - 3 - Ray and Phil Baker.jpg (108.03 KiB) Viewed 1314 times

It was put into some kind of racing boat

[510rob]

https://www.youtube.com/watch?v=Rz3qVKaKntc