Page 1 of 1

New from JAPAN

Posted: 19 Jul 2017 10:12
by JP2400
New from Yokohama Japan!
1972 510 swapping Honda K24A with S2K 6 speed :D
image1.JPG
image1.JPG (161.39 KiB) Viewed 4783 times
IMG_5223.JPG
IMG_5223.JPG (165.54 KiB) Viewed 4783 times

Re: New from JAPAN

Posted: 19 Jul 2017 12:10
by two_68_510s
Hi! is that engine normally longitudinal? Very clean installation, how much HP? Welcome.

Re: New from JAPAN

Posted: 19 Jul 2017 13:46
by 510rob

Re: New from JAPAN

Posted: 19 Jul 2017 18:09
by JP2400
Hello, Thank you for your comments.
This engine is normally latitude, so required custom fitting parts to utilize S2K manual transmission. Those can be purchased in the US. Japanese tuning shop, S&A autocreate , installed it very nicely.
The HP could be approx. 200HP as K24A2 stock for Odyssey absolute. Not so much power, but enough torque for easy drive:)

Re: New from JAPAN

Posted: 20 Jul 2017 01:34
by 510rob
Beautiful car. Welcome to the site. I noticed that your car is left hand drive as well. Is that rare to see in Japan?

Re: New from JAPAN

Posted: 20 Jul 2017 02:56
by JP2400
Thank you very much:) Yes, it is! But nobody realize it on the street except enthusiasts.
Born in Yokohama, 1972
Raised in Beverly Hills, 1972-1997
Customed in Yokohama, 2017
She is a frequent flyer:)

Re: New from JAPAN

Posted: 20 Jul 2017 16:48
by PoorMtnKid
Awesome swap! I was looking into this for a while after I seen a Miata had one it it. I couldnt come to make the change from my SR based on the costs. Very cool to see.

Re: New from JAPAN

Posted: 20 Jul 2017 20:13
by JP2400
Thank you! Could be the first swap on 510. Actually, I planned SR20 swap at the beginning, but it was difficult to find a good one in Japanese junk yard. Thanks to Miyata or S2K swappers, K24A2 is becoming a feasible option now:) Much cheaper than F20C on S2K and many tuned parts are available in the market! My 510 is a kind of proto-swap with K24A, so I'm looking forward to seeing more insane Datun in the near future.

Re: New from JAPAN

Posted: 20 Jul 2017 20:46
by McShagger510
Interesting swap fo sho! Welcome to the site.

James

Re: New from JAPAN

Posted: 21 Jul 2017 04:29
by JP2400
Thank you, James! New challenge is always exiting as you know:)

Re: New from JAPAN

Posted: 29 Jul 2017 10:26
by duke
Welcome! Very cool swap. You have got me contemplating. Do you have any pictures of the underside of the car? I would like to see what you did for the oil pan and stuff. Do you know how much weight was added with this engine?

Re: New from JAPAN

Posted: 01 Aug 2017 07:50
by JP2400
Thank you, Duke!

Unfortunately, I don't have a clear pic of the under floor. The shop, S&A auto create in Japan, did really good work on oil pan and crossmember to avoid travel range of steering link.
image1.JPG
image1.JPG (158.24 KiB) Viewed 4494 times
As for added weight, I have not measured it, but I found some numbers on the web as shown below... Significant increase!! :shock:
L16: 260lbs
K24A2: 413lbs
Diff: 153lbs

Re: New from JAPAN

Posted: 02 Aug 2017 05:22
by KiKiIchiBan
Very nice looking car.

Re: New from JAPAN

Posted: 02 Aug 2017 07:23
by JP2400
Thank you!
Your racing car also looks very cool with Refresh 60 decal:) I live in Yokohama, and near Refresh 60. Very sadly, it will be closed within this year :(