View and post your 510 project(s)
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 29 Jun 2021 05:28
IMG_0159.jpg (30.48 KiB) Viewed 1549 times
IMG_0161.jpg (35.21 KiB) Viewed 1549 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 29 Jun 2021 05:30
IMG_0158.PNG (345.08 KiB) Viewed 1549 times
IMG_0162.jpg (36.98 KiB) Viewed 1549 times
Back from Media. Started with the rear quarters
KiKiIchiBan
Supporter
Posts: 508 Joined: 26 Feb 2014 23:46
Location: London, England
Post
by KiKiIchiBan » 29 Jun 2021 07:35
Wilse wrote: ↑ 17 May 2021 15:29
Thanks for those Michael. I’ve loved watching your build with the Coupe. It’s giving me inspiration..
Question for you ( or anyone else in the know) does the NOS rockers that you put on yours have a “step” where the quarter panel wraps over the top of the rocker? I’ve got reproduction ones and they are just straight through?
I used the muscle car gt ones that are easily available on Ebay, yahoo etc and via various resellers like Al's, futo etc that were made to fit my coupe. They're not the same as the OEM ones and in hindsight I wish I kept more of the original metal and just replaced the rotten parts instead of the entire rocker. Mine were straight through but my fab guy made them fit:
510 progress
510 progress
Progress on yours looks awesome
keep it up
My P510 Bluebird SSS Coupe www.the510realm.com/viewtopic.php?t=26929
https://www.instagram.com/kikiichiban/
https://www.youtube.com/channel/UCBP1x8z2IBvfs-MQH2Gc73Q/featured
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 21 Jul 2021 20:46
IMG_0283.jpg (111.02 KiB) Viewed 1459 times
IMG_0284.jpg (106.38 KiB) Viewed 1459 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 21 Jul 2021 20:48
After some advice on this rail repair.
Any one thats attempted this, am I better off trying to graft a whole new rail in, or cut out only the rust affected section and re join a good one?? Bearing in mind that I am replacing the front frame rail and rad support panel at the same time..
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 28 Aug 2021 00:42
The 1st little rust repair
Attachments
D7AC7B42-3AC8-46CE-BBBF-7A77B3AB3F5D.jpeg (28.78 KiB) Viewed 1358 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 28 Aug 2021 00:43
E3F0998B-2688-407E-8638-BE4E074BFD16.jpeg (44.21 KiB) Viewed 1358 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 28 Aug 2021 00:45
And clean up the dash frame
Attachments
3CE050A3-4BCD-4800-B008-D88A52CD511E.jpeg (179.72 KiB) Viewed 1358 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 21 Oct 2021 15:26
Slowly working through the Rust.. Fun
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 21 Oct 2021 15:31
6D82B58F-4AD5-4D7B-9117-B6B5A316484A.jpeg (28.67 KiB) Viewed 1226 times
Attachments
84AD960A-BBC5-43D5-96C2-20E1533F7234.jpeg (52.59 KiB) Viewed 1226 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 21 Oct 2021 15:33
New tail panel only fits standard lights, so lots of cutting and Hammer/ Dolly work in this..
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 07 Nov 2021 23:29
Lots more been done. Frame rail and rad support out. Pax side Frame rail repair done.
5B8F7855-5ABD-4AA7-816E-E341D401CDEC.jpeg (29.63 KiB) Viewed 1150 times
Attachments
E53A3A25-4DF9-4205-8401-488C7E885E46.jpeg (35.29 KiB) Viewed 1150 times
D807C90A-7761-48E5-A617-C7C3E1CF3D8B.jpeg (36 KiB) Viewed 1150 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus
Post
by Wilse » 08 Nov 2021 15:57
A bit more. Before, during and after. Left the welds there as will be covered by rocker.
9FD1C33F-5BAC-450D-8901-244AEAE405AC.jpeg (41.36 KiB) Viewed 1117 times
Attachments
590AD71E-849B-4F7E-80C2-C88EAEAC849F.jpeg (31.13 KiB) Viewed 1117 times
0BB7E5E5-C373-4B8F-90FC-29EFC077F423.jpeg (24.53 KiB) Viewed 1117 times
Wilse
Posts: 47 Joined: 26 Apr 2020 02:42
Location: Sydney,Aus