The start.

Post by **S15DET** » 23 Apr 2007 09:43

You guys were talking about being without a 510 to drive. I've only EVER driven a 510 maybe 400 yards. When I bought my '69 in 2002, I drove it around the owner's garage, and onto the trailer, and that's it. Hopefully 2007 will be the year!! I don't even know what to expect.

Post by **Mattndew76** » 23 Apr 2007 10:10

Its a Generic brand of sound deadening. and each roll is about 2lbs. I used one roll. I bought 120ft of it off of ebay. Ill link you guys when I get home.

Post by **Mattndew76** » 23 Apr 2007 20:26

Another pic. The tail lights are in, and the rear suspension is bolted up.

Post by **Mattndew76** » 24 Apr 2007 16:40

God GOD!! I wheeled the car out in the driveway and man Oh man, I need to long board the body and fill some low spots.

Post by **Mattndew76** » 25 Apr 2007 16:45

Todays pics.

Post by **Mattndew76** » 25 Apr 2007 16:47

Post by **duke** » 25 Apr 2007 17:19

Mattndew76 wrote:God GOD!! I wheeled the car out in the driveway and man Oh man, I need to long board the body and fill some low spots.

Its a race car isn't it? Just put stickers over the bad spots and call it done!

Post by **Mattndew76** » 25 Apr 2007 17:32

True. But it makes me feal like I did a really sloppy job. So I will complete the car and then drive my work.

Post by **Mattndew76** » 28 Apr 2007 16:39

My scabby car.

Post by **Mattndew76** » 29 Apr 2007 11:25

Well I have no Idea what to do about my hood. Due to the roll cage being attached to the shock towers, I can put the hinge's on for the hood. I dont really want to poke four holes in it for pins. So I need to find a solution so I can either bolt up the stock hood or Trade it for a fiberglass one. That way I can pin the Fiberglass one.

Datsunkid-510- · Post by **Datsunkid-510-** » 29 Apr 2007 13:42

jbweld

Post by **510-Trevor** » 29 Apr 2007 14:23

Get fibreglass, A reinforced glass hood will weigh less and be easier to remove when needed.

Post by **Mattndew76** » 29 Apr 2007 20:08

Anyone in the market for a nice hood? I need to get a composite hood.

Post by **S15DET** » 30 Apr 2007 09:47

I would be interested in the hood, but the shipping costs to get it to the Right coast make it impractical. Unless someone knows of an inexpensive way? I'm going to check uship.com.

Post by **Mattndew76** » 01 May 2007 19:35

My new Generic seats.