The 510 Realm

Is the hitachi vacuum diaphragm driven? On My earlier 510, The secondary butterfly had corroded and frozen due to a cracked vacuum diaphragm. I was able to eventually work it free, and then repaired the diaphragm that activated it. The weber is fine, but it takes a fair amount of tuning to actually ...

I think those are from a 710. What year is your 510? datsun-710-1973-4-3100688975.jpg 710 hubcaps are out there it looks like... https://www.ebay.com/itm/275373028168?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338678874&toolid=20006%26customid%3Ds%253AGS%253Bgc%253A596082a755911...

Definitely looks better!

You might start by taking some measurements at the control arm mounting points at the subframe to the ground on each side - then you could tell if the subframe is level with the ground.

It wouldn't be the mustache bar - its something related to how the wheel and suspension attaches to the body. I agree with the Isolator - I also think there are different thicknesses that came in as well. I would take pics of the control arms - as well as potentially the rear subframe attaching poin...

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=aluminum+radiator+datsun+510&_sacat=0&_odkw=dna+aluminum+radiator+datsun+510&_osacat=0 Same company (DNA) sells 2 row one bay with fans for $106.00 I would check reviews and get a 3 row on ebay for less th...

There are a lot of companies that are using this same layout. Depending on engine - you might consider a 3 or 4 row, for a little more money. The main issue (I have one similar to this) is that the alternator pull is extremely close to the lower hose location. It fits in my case, but it essentially ...

I thought all 510's were kick ass inherently?

Nothing like a little bling!

You can put your location in your profile - lets everyone know where you are. Looks like a cool car.

Where are you located? Nice car

That sucks! I don't have any input on your seal question - just bummed for you. I guess they didn't get in though?

Do you have the stock plastic tray that sits on the shelf? It is bigger than the shelf - and hangs over. But the width is set up for the j shaped hold downs to sit on the ends (with a stock metal rim. I do believe the 24f is the correct size.....

OK! I just wondered if there was some terminology that I didn't know. I couldn't figure out what the typo was. I actually think autocorrect doesn't help us - because it changes the typo to an actual word, which is more confusing.

Forelimb looking. Super curious as to what that involves.