Search found 1875 matches
- 08 Dec 2005 09:28
- Forum: General Discussion
- Topic: do chicks dig 510 guys
- Replies: 81
- Views: 29664
- 07 Dec 2005 17:07
- Forum: General Discussion
- Topic: Autopower Rollbar
- Replies: 5
- Views: 2139
RE: Autopower Rollbar
mount the main hoop as far back as you can, right in the corner where the floor steps up the the back seat. It will allow you to have full movement of the seat. Mine still rests against the bar with it this far back. As for the legs, if you don't mind loosing the back seat, mount them to the shock t...
- 06 Dec 2005 09:37
- Forum: Project Builds
- Topic: heim joint lower control arm project.
- Replies: 37
- Views: 12148
- 05 Dec 2005 08:23
- Forum: Project Builds
- Topic: heim joint lower control arm project.
- Replies: 37
- Views: 12148
byron, do you have any pictures of the kontroll T/C rod bushing? Where are they available from? I was also wondering about the mounting point of the T/C rod to the control arm. Why not get rid of the stock mount all together and just use a heim joint the at bolts to the stock location? I would think...
- 01 Dec 2005 08:09
- Forum: General Discussion
- Topic: custom exhaust in SD
- Replies: 12
- Views: 2678
i used a TIG, but you can easily do it with a MIG. just set the thing low, like about 60 amps or something, and set the wire speed low, and it will work. all exhaust shops use MIGs. just make sure you try it on some pieces so that you can get the settings just right, and go at it. the one thing to r...
- 30 Nov 2005 21:34
- Forum: General Discussion
- Topic: custom exhaust in SD
- Replies: 12
- Views: 2678
come on, just do it yourself, it isn't that hard. just go to most any exhaust shop and buy some mandrel u bends of the desired size, one or two will do, some straight tubing, and whatever muffler you like and match,cut, and weld! my first one took me about a day but i feld way cooler being able to s...
- 28 Nov 2005 14:15
- Forum: Technical - Archive
- Topic: SU Help!
- Replies: 16
- Views: 4875
just look around the manifold and look for any fittings that could be leaking (like the crank case vent valve, for example) and block off any thing that could leak. i just ended up welding up all the holes in my manifold and running the crankcase and valve cover vents to a catch can. took care of an...
- 27 Nov 2005 13:11
- Forum: Technical - Archive
- Topic: SU Help!
- Replies: 16
- Views: 4875
well, if you got a pop it sounds like there is fuel. check to make sure that the plugs aren't fouled, check the distributor and make sure that timing isn't off. it sounds like your getting fuel and air, so my guess is that its ignition related. maybe also try without the chokes on. i don't even use ...
- 26 Nov 2005 17:47
- Forum: Technical - Archive
- Topic: SU Help!
- Replies: 16
- Views: 4875
well, if you are trying it in the state of the photo, you have one hell of a vacume leak. the valve for the crank case vent between the carbs should be hooked up to something or blocked off. i have no idea what any of the circled thing are, but they don't look like they would affect the car running ...
- 24 Nov 2005 00:56
- Forum: Classifieds
- Topic: WTB hood
- Replies: 0
- Views: 718
WTB hood
looking for a hood in the norther california area. doesn't have to be pristine, just no huge dents or rust. and just a reminder to all, ALWAYS PUT YOUR HOOD PINS IN!!!!!
- 24 Nov 2005 00:51
- Forum: Classifieds
- Topic: 510 Dual Intake Manifold for sale
- Replies: 5
- Views: 1934
RE: 510 Dual Intake Manifold for sale
i was trying to say "what carbs is it for?" (i know its bad english)
- 23 Nov 2005 15:55
- Forum: Classifieds
- Topic: 510 Dual Intake Manifold for sale
- Replies: 5
- Views: 1934
RE: 510 Dual Intake Manifold for sale
what kind of manifold is it, what carbs is if for?
- 23 Nov 2005 15:53
- Forum: Technical - Archive
- Topic: Weber Carbs
- Replies: 6
- Views: 2065
RE: Weber Carbs
i need linkage parts, like the stuff on the throttle shaft and the stuff that goes to the stock linkage. do you have stuff like that?
- 19 Nov 2005 21:40
- Forum: Technical - Archive
- Topic: using 280zx steering arms
- Replies: 0
- Views: 774
using 280zx steering arms
I am rebuilding my front suspension and hav done the conversion to 280zx struts. when i got the stuts they came with the steering arms. i was on the bluebird list and read the one can use the 280zx steering arms to quicken the steering from 3 turns lock to lock to 2.5. they say that you have to use ...
- 26 Oct 2005 14:26
- Forum: Technical - Archive
- Topic: faster steering ratio
- Replies: 1
- Views: 946
faster steering ratio
Im looking to make the steering ratio faster on my 510. Ive looked into rack and pinion, but haven't really seen any good solutions without flipping the crossmember (i don't want to use a front mounted rack). So I was wondering if anybody out there knew of someplace I could get new gears for the ste...