The 510 Realm

Good progress....following the results Don can mod the steering knuckles for you...he did mine and as well raised the LCA pivot up a little more than an inch. My race car is in the trailer hibernating right now, if I can get it into the shop soon I'll snap some pics. Need to start prepping for the s...

going that low you will need to have Don modify a front crossmember for you....moving the LCA inner pivot up so that its closer to parallel or even pointing down. Currently as it goes through compression you have positive camber gain. He also provides a nice solution for the t/c rod which moves it u...

WOW, thats a great score. I'm partial to the color as well. Congrats

Jeff,

Did you ever get in touch with Don Oldenberg at Design Products?

Chip

Thanks for the prompt. Been spending more time doing work than updating. The project is back on all fours. I was working on building the exhaust, but that has been delayed because my 2 into 1 collector isn't showing up till the 2nd week in January...so its on to other items...lots of other little st...

Me Too!

Got the VG30 mounted and in the 510. I have been working on plumbing, exhaust, wiring, etc. One of the items that I'm not sure of or undecided upon is the configuration of the air intake, filter, and MAF prior to the throttle body. I would like to use the stock MAF which has a OD of 3 1/8" on b...

Well its in and it definitely looks as though it belongs in there. Front suspension comes next and getting it back on all fours.

Thanks Dave this is great info. Wanted to add a little about the clutch style diff. I am using the STi R180 in my Vintage track car. After/during initial installation I noted how easily the axles seemed to break loose from one another. The performance of the car suffered during the weekend at the tr...

Thanks Dave, Certainly the parts car deal we struck went a long way to helping me formulate the current plan for both 4dr cars. Not to mention the VG parts that you had been hanging on to that got this project off the ground. Of course your advice as well as advice from the Realm group was much appr...

Check with Dave at Futofab....he has some seconds that he is making partials out of

The parts i was waiting on from the powder coater came back friday and the shoulder is healing so some progress was made today. Oil pan and pickup installed. TT motor mount brackets and mounts installed. Rear timing cover, water pump, cleaned up cam gears, timing belt and tensioner installed. Crossm...

Plenty of travel Dave

Dave,

Thought I saw some correspondence with Baz about possible quality weatherstrip...any progress?

Brad is that a new project I see there mate?

You coming up this way anytime?...if so you will need to bring the family by...say hello to all...I'll also have to come down at some point when my shoulder is fully healed and I have a running street car again.