Am I in over my head? '70 2 door from scratch
- funwithmonkeys
- Supporter
- Posts: 1337
- Joined: 05 Sep 2013 09:34
- Location: Vancouver, BC
Re: Am I in over my head? '70 2 door from scratch
It was garagefive.
http://www.garagefive.net/
You can look on the Cusco site for what is available. Mine was made to order so it took about 6 weeks to get. They make one for the Datsun 240 which has the smaller inner diameter ring gear and the subaru one which is the larger. I got the 1.5 way.
http://www.garagefive.net/
You can look on the Cusco site for what is available. Mine was made to order so it took about 6 weeks to get. They make one for the Datsun 240 which has the smaller inner diameter ring gear and the subaru one which is the larger. I got the 1.5 way.
If no one from the future comes back to stop you from doing it then how bad of a decision can it really be?
Re: Am I in over my head? '70 2 door from scratch
Thanks! I browsed around on the Cusco website - pretty cool technology.
DId you go with the RS or MZ?
DId you go with the RS or MZ?
Regards,
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
- funwithmonkeys
- Supporter
- Posts: 1337
- Joined: 05 Sep 2013 09:34
- Location: Vancouver, BC
Re: Am I in over my head? '70 2 door from scratch
The RS. It is a very nice piece.
If no one from the future comes back to stop you from doing it then how bad of a decision can it really be?
Re: Am I in over my head? '70 2 door from scratch
Thanks again... could be a good option. Do you know if it would replace all the welded together stuff in my current R180? It looks like it would. Better if I can make use of some of what I have.
Regards,
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
- funwithmonkeys
- Supporter
- Posts: 1337
- Joined: 05 Sep 2013 09:34
- Location: Vancouver, BC
Re: Am I in over my head? '70 2 door from scratch
It is a complete unit. You only need the ring gear and pinion. And the bolts.
If no one from the future comes back to stop you from doing it then how bad of a decision can it really be?
-
- Supporter
- Posts: 179
- Joined: 11 Mar 2021 03:51
- Location: Dallas, TX
Re: Am I in over my head? '70 2 door from scratch
Check out 541 Motorsports on EBay - they are an auto dismantler and have WRX STi diffs - and many other parts…
https://www.ebay.com/str/541motorsports
https://www.ebay.com/str/541motorsports
Re: Am I in over my head? '70 2 door from scratch
A couple of updates... I sourced a Subaru R180 rear differential 3.54 with Torsen LSD from G&R Foreign in Salem, OR - they were great to deal with. It should arrive tomorrow and I'll post pictures.
I also sourced the remaining Autometer Gauges I need to finish my SSS Dash. Fingers crossed I have those for the weekend and can finish the dash assembly - again, pictures coming.
Hoping to connect with my paint guy this week to find out about availability to paint and go over the project with him to finalize whether I do some pre-assembly prior to paint or just get er done and then try to work carefully with the painted shell.
Finally I was able to finish my gas tank refurbishment. Tanks Inc PA-4 in tank fuel pump (255 litres per hour) and their replacement 9" fuel level sender as well. Overall, I am pretty happy with the outcome. It was a bit finicky (what isn't?) and drilling a 4.5 inch hole in a used fuel tank was a bit nerve wracking (are all the fumes gone????), but it turned out pretty nice!
Tanks Inc PA-4 in tank fuel pump assembly: Hole for fuel pump: Fuel Sender: Hole for fuel sender: And the finished product:
I also sourced the remaining Autometer Gauges I need to finish my SSS Dash. Fingers crossed I have those for the weekend and can finish the dash assembly - again, pictures coming.
Hoping to connect with my paint guy this week to find out about availability to paint and go over the project with him to finalize whether I do some pre-assembly prior to paint or just get er done and then try to work carefully with the painted shell.
Finally I was able to finish my gas tank refurbishment. Tanks Inc PA-4 in tank fuel pump (255 litres per hour) and their replacement 9" fuel level sender as well. Overall, I am pretty happy with the outcome. It was a bit finicky (what isn't?) and drilling a 4.5 inch hole in a used fuel tank was a bit nerve wracking (are all the fumes gone????), but it turned out pretty nice!
Tanks Inc PA-4 in tank fuel pump assembly: Hole for fuel pump: Fuel Sender: Hole for fuel sender: And the finished product:
Regards,
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
-
- Posts: 261
- Joined: 19 May 2013 20:57
- Location: Langley, BC
Re: Am I in over my head? '70 2 door from scratch
Nice work. So the stock fuel sender is no longer used then?
Re: Am I in over my head? '70 2 door from scratch
Correct, the new fuel pump would have interfered with the float arm. I considered trying to bend it around some how, but the original float and sensors are not renowned for accuracy. I cut the original sender float arm off and reinstalled it to seal that hole. The new one should be more accurate and reliable and takes very little room. I only wish I had ordered it when I ordered the fuel pump to save a bit on shipping.
I have to say that I was pleasantly surprised by the ease of the shipping from Tanks Inc. - both were shipped Fedex ground international and (at least so far) I have not been charged any brokerage, duties, taxes, blah, blah, blah that are usually very frustrating and expensive with these cross border shipments.
Regards,
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Re: Am I in over my head? '70 2 door from scratch
My 2013 Subaru STi R180 3.54 Torsen LSD finally arrived today. It was well packaged and prepared for shipping by G&R Foreign. A little rustier on the outside than I hoped so I was a little worried before I cranked it open...
The internals look perfect! The outside is pretty easy to clean up so I'm pretty happy with this. I'll order new seals and get to cleaning it up over the next week or so.
The internals look perfect! The outside is pretty easy to clean up so I'm pretty happy with this. I'll order new seals and get to cleaning it up over the next week or so.
Regards,
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
-
- Posts: 261
- Joined: 19 May 2013 20:57
- Location: Langley, BC
Re: Am I in over my head? '70 2 door from scratch
So a little off topic here-
Big Congrats on winning the BaT Success Story of the Year!
There aren’t two ‘ostaylor’ car guys out there surely…
Big Congrats on winning the BaT Success Story of the Year!
There aren’t two ‘ostaylor’ car guys out there surely…
Re: Am I in over my head? '70 2 door from scratch
Thanks! - The story itself was quite an adventure and getting it written and posted on BaT took some time (we bought and presented the car to my oldest brother in 2019). We were really pleased to have been nominated for the annual award and even more pleased to win the category which they announced on Monday :^). Here's the award if anyone is interested:greenthumb wrote: ↑11 Jan 2022 20:30 So a little off topic here-
Big Congrats on winning the BaT Success Story of the Year!
There aren’t two ‘ostaylor’ car guys out there surely…
https://bringatrailer.com/2022/01/10/20 ... -the-year/
Regards,
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
-
- Posts: 261
- Joined: 19 May 2013 20:57
- Location: Langley, BC
Re: Am I in over my head? '70 2 door from scratch
I actually posted my previous comment before I read the article. What a tremendous uplifting story. Mad props to you and your brother for considering such a gesture, and then actually carrying it through right down to the perfect presentation.
Love wins
Love wins
Re: Am I in over my head? '70 2 door from scratch
Man, great story, and a great brother.ostaylor wrote: ↑12 Jan 2022 06:01Thanks! - The story itself was quite an adventure and getting it written and posted on BaT took some time (we bought and presented the car to my oldest brother in 2019). We were really pleased to have been nominated for the annual award and even more pleased to win the category which they announced on Monday :^). Here's the award if anyone is interested:greenthumb wrote: ↑11 Jan 2022 20:30 So a little off topic here-
Big Congrats on winning the BaT Success Story of the Year!
There aren’t two ‘ostaylor’ car guys out there surely…
https://bringatrailer.com/2022/01/10/20 ... -the-year/
We do cool things for brothers…
Here’s my story…
https://the510realm.com/viewtopic.php?f ... hawn’s+510
Byron
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: Am I in over my head? '70 2 door from scratch
Thanks Byron - that is a well documented story and build thread in one! I didn't read every post but I got the gist of it. Sounds like another great adventure.Byron510 wrote: ↑15 Jan 2022 08:21
Man, great story, and a great brother.
We do cool things for brothers…
Here’s my story…
https://the510realm.com/viewtopic.php?f ... hawn’s+510
Byron
Regards,
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI
Owen
70 Datsun 510 2 door - SR20DET - https://www.the510realm.com/viewtopic.php?t=34572
64 Studebaker Daytona - Supercharged 289 4 speed
65 Sunbeam Tiger MkI