Got rid of the heater lines from under the intake manifold.
from this
To this
Vacuum tested to make sure it dose not leak
Besides that no real updates waiting on a check to clear the bank so i can order some more stuff until than im in a waiting state
510 project in san diego
- 71pl510SanDiego
- Posts: 184
- Joined: 19 Jul 2007 14:58
- Location: san diego
- 71pl510SanDiego
- Posts: 184
- Joined: 19 Jul 2007 14:58
- Location: san diego
Re: 510 project in san diego
Front T3 coilovers, lower control arms,tie rod ends, Troy Ermish front brake upgrade with new master cylinder came in on Tuesday. Worked on the car installing the parts today.
Shortly after taking this photo i realized that i had the left strut on the right side of the car,had to take it off and install it on the
drivers side.
Shortly after taking this photo i realized that i had the left strut on the right side of the car,had to take it off and install it on the
drivers side.
Re: 510 project in san diego
Pretty parts. FWIW, swapped struts sides don't impact anything except caliper position, which also doesn't really matter.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
- 71pl510SanDiego
- Posts: 184
- Joined: 19 Jul 2007 14:58
- Location: san diego
Re: 510 project in san diego
The UPS man came today and delivered a new fidanza flywheel and competition clutch kit stage 2, had some free time at work and installed those on the engine.