Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
This is an x- westwood B sedan car- amazingly clean body- While the unflared car i have - Pumpkin Pie-- this is going to be the outside pumpkin orange- Halloween beast. I saw a orange 510 back at Shasta in the early 90s and always wanted one that color..
I decided that a 300+ HP SR was a bit overkill for an unflared car and have decided to keep the pumpkin L series-- it will likely get the SU's changed out for dual 44s sometime this year - but now the focus is on this car.. and a friend saw it and decided he needed one as well - so building 2 almost identical cars-- One will be Grey and the other is GT3 RS orange.
I had stripped the car with the intention of going vintage racing-- it has all the right BRE parts- but i realize i dont really need TWO race cars - Its being built so that i can take it to track days with "regular" folk ,and it may make its way to Area 27 at some point.
The Plan thus far:
strip body- sandblast- built a dolly -
SR20DET, Manley rods- Wiseco pistons, Link Ecu, I/C from Cxracing- then modified. Still learning how to TIG aluminum so this is giving me some needed practice.
Subie 4.44 CLutch R180 , DSS CV shafts, Lightweight flywheel- ALum driveshaft- ACT 400hp clutch
DP racing offset camber plates- coilovers- Koni race inserts, 8" x 300 lb front hypercoils
JBC crossmember and escort rack and pinion
Heim TC rods and Lower a-arms- TIlton/DP racing swaybars were already on the car
Rear is Bryons brackets with DP racing inner monoballs- - its got weight jackers and coilover rear shocks so can pick between-
rear starting with 6 x 1100 lb hypercoils with the DP coilover spring conversion for the rear a arms
the entire body was mostly seam welded back in 1971-- so just needs cleaning up - the fuel cell i took out was dated 1972-- so its been a race car most of its life.
Made a battery box and sunk in the trunk as others have done-- braced trunk floor with 3/4 x 1.5" Square tubing for the EFI tank-- Originally was going to put a race cell in it but the Mustang EFI tank fits so well that its in both cars.
Welded up all the "additional" holes from years of racing..
my first "real" 510 after having 15+ mild modified ones-- was Vances x-GT4 car that he won the canadian nationals in in like 1982? Had the specialty airdam for a while then changed to the spook--
then the pictures of this car on arrival day-- then stripping it
im playing with picture hosting -- my dropbox is almost out of the free storage-- and cant figure out how to get the amazon hosted image to load embedded..
so using PS to reformat for web-- less painful that dropbox
I decided that a 300+ HP SR was a bit overkill for an unflared car and have decided to keep the pumpkin L series-- it will likely get the SU's changed out for dual 44s sometime this year - but now the focus is on this car.. and a friend saw it and decided he needed one as well - so building 2 almost identical cars-- One will be Grey and the other is GT3 RS orange.
I had stripped the car with the intention of going vintage racing-- it has all the right BRE parts- but i realize i dont really need TWO race cars - Its being built so that i can take it to track days with "regular" folk ,and it may make its way to Area 27 at some point.
The Plan thus far:
strip body- sandblast- built a dolly -
SR20DET, Manley rods- Wiseco pistons, Link Ecu, I/C from Cxracing- then modified. Still learning how to TIG aluminum so this is giving me some needed practice.
Subie 4.44 CLutch R180 , DSS CV shafts, Lightweight flywheel- ALum driveshaft- ACT 400hp clutch
DP racing offset camber plates- coilovers- Koni race inserts, 8" x 300 lb front hypercoils
JBC crossmember and escort rack and pinion
Heim TC rods and Lower a-arms- TIlton/DP racing swaybars were already on the car
Rear is Bryons brackets with DP racing inner monoballs- - its got weight jackers and coilover rear shocks so can pick between-
rear starting with 6 x 1100 lb hypercoils with the DP coilover spring conversion for the rear a arms
the entire body was mostly seam welded back in 1971-- so just needs cleaning up - the fuel cell i took out was dated 1972-- so its been a race car most of its life.
Made a battery box and sunk in the trunk as others have done-- braced trunk floor with 3/4 x 1.5" Square tubing for the EFI tank-- Originally was going to put a race cell in it but the Mustang EFI tank fits so well that its in both cars.
Welded up all the "additional" holes from years of racing..
my first "real" 510 after having 15+ mild modified ones-- was Vances x-GT4 car that he won the canadian nationals in in like 1982? Had the specialty airdam for a while then changed to the spook--
then the pictures of this car on arrival day-- then stripping it
im playing with picture hosting -- my dropbox is almost out of the free storage-- and cant figure out how to get the amazon hosted image to load embedded..
so using PS to reformat for web-- less painful that dropbox
- Attachments
-
- yellow-1986-web-spook.jpg (103.67 KiB) Viewed 6266 times
-
- 1986-yellow-510-web.jpg (439.32 KiB) Viewed 6266 times
-
- purchase-day-sized-web.gif (421.91 KiB) Viewed 6267 times
Last edited by cartel on 27 Feb 2020 12:34, edited 3 times in total.
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Beast
Disassembly-- and 2 gallons of paint stripper before sending off to the blaster.
- Attachments
-
- disassembley2-web.jpg (254.78 KiB) Viewed 6264 times
-
- dis-4-web.jpg (332.13 KiB) Viewed 6264 times
-
- all-the-parts-on-the-floor-web.jpg (343.23 KiB) Viewed 6264 times
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Beast
found the original purple under the blue-- and then back from the blaster
- Attachments
-
- paint-stripper-2-web.jpg (248.2 KiB) Viewed 6264 times
-
- paint-strip-23-web.jpg (242.57 KiB) Viewed 6264 times
-
- mikes-after-blasting-web.jpg (194.58 KiB) Viewed 6264 times
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Beast
Engine bay prep done and primed -- time to go to bodyshop for borrowing booth for paint-- if it wasnt bright orange i might paint it at work or roll it outside but its not really warm enough outside for that yet.
Using SPI black epoxy on top of bare blasted sheetmetal - then seam sealer -
decided that i want some other protection so put a extremely light coat of european texture on top then doing the paint
- when the car was originally built they painted the whole chassis an off white- all the floors and inside was painted-- In trying to closely match this color i found Porsche "chalk" for the lower portion- almost identical to the color it was - and fitting as the exterior is porsche pure orange-
could have done all orange but for some reason part of me wants to build it like it was .
Heater hoses relocated to come out just under SR intake- will be a AN bulkhead fitting like used for AC--
and the large hole is for the Wiring Specialties EFI harness
Wilwood pedal setup under dash with all the master cylinders so no firewall holes
Using SPI black epoxy on top of bare blasted sheetmetal - then seam sealer -
decided that i want some other protection so put a extremely light coat of european texture on top then doing the paint
- when the car was originally built they painted the whole chassis an off white- all the floors and inside was painted-- In trying to closely match this color i found Porsche "chalk" for the lower portion- almost identical to the color it was - and fitting as the exterior is porsche pure orange-
could have done all orange but for some reason part of me wants to build it like it was .
Heater hoses relocated to come out just under SR intake- will be a AN bulkhead fitting like used for AC--
and the large hole is for the Wiring Specialties EFI harness
Wilwood pedal setup under dash with all the master cylinders so no firewall holes
- Attachments
-
- rh-inner-fender-sealer-web.jpg (178.26 KiB) Viewed 6213 times
-
- rear-floorpan-sealer-web.jpg (149.28 KiB) Viewed 6213 times
-
- rear-floor-cross-sealer-web.jpg (148.15 KiB) Viewed 6213 times
-
- lh-floor-sealer-web.jpg (234.98 KiB) Viewed 6213 times
-
- inner-fender-sealed-web.jpg (156.37 KiB) Viewed 6213 times
-
- front-rad-area-web.jpg (235.64 KiB) Viewed 6213 times
-
- engine-bay-sealer-web.jpg (213.84 KiB) Viewed 6213 times
-
- engine-bay-primer-web.jpg (206.86 KiB) Viewed 6213 times
-
- engine-bay-4-web.jpg (197.3 KiB) Viewed 6213 times
-
- engine-bay-2-web.jpg (191.79 KiB) Viewed 6213 times
Last edited by cartel on 14 Feb 2020 17:13, edited 1 time in total.
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Beast
what a great starting point
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Beast
Finally painted..and a sr20 porn shot of chris' manifold and turbo setup
The lights at work are making this seem more yellow . As its identical to the porsche i put in..
The lights at work are making this seem more yellow . As its identical to the porsche i put in..
- Attachments
-
- screen_shot_2016_01_05_at_5_52_23_pm_0e1b4c64e9119ec517d014829ce96f68c7ef3b34.png (407.03 KiB) Viewed 6020 times
-
- IMG_20200227_122836_516.jpg (175.91 KiB) Viewed 6042 times
-
- IMG_20200227_122836_492.jpg (172.91 KiB) Viewed 6042 times
-
- IMG_20200227_122836_494.jpg (161.65 KiB) Viewed 6042 times
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Very nice, I can't wate to get to this stage with my 2 door that's all apart.
- eastbaysolo_73
- Supporter
- Posts: 707
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Nice keep up the good work.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Thanks!
Got diff bolted in and started on the DSS CV shaft install-- not a "bolt in"
Got diff bolted in and started on the DSS CV shaft install-- not a "bolt in"
- Attachments
-
- diff-cv-web.jpg (62.44 KiB) Viewed 5684 times
Last edited by cartel on 05 Apr 2020 07:27, edited 1 time in total.
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
well getting to spend more time in the shop -- got the doors off and epoxy primed with SPI-- dynamat the inside
and then to "de racecar" the doors by welding the inners back in from some donor doors purchased..
and then to "de racecar" the doors by welding the inners back in from some donor doors purchased..
- Attachments
-
- 510-door-inner-w.jpg (451.72 KiB) Viewed 5683 times
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
- eastbaysolo_73
- Supporter
- Posts: 707
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Bad ass build man ! Love that color.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Bulkhead plate for heater hoses.. and doors welded back together..
Porta power the trans tunnel an inch wider so the transmission doent rub on the sides..theres one spot that rubbed.
Porta power the trans tunnel an inch wider so the transmission doent rub on the sides..theres one spot that rubbed.
- Attachments
-
- 20200404_103543.jpg (648.95 KiB) Viewed 5570 times
-
- 20200331_164142.jpg (743.94 KiB) Viewed 5587 times
-
- 20200403_153301.jpg (235.08 KiB) Viewed 5587 times
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
- eastbaysolo_73
- Supporter
- Posts: 707
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Nice that looks super good.
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
well done !
especially given the time in witch you accomplished it.
especially given the time in witch you accomplished it.
Progress is slow, but it is progress non the less.
Re: Mikes 71 Flared SR20DET GT3 Pure Orange Gourd
Got the "new" front brakes finally done - Round 2.. i had already made 12.2" x .810 rotors with hats and custom strut ear mounts that fit VTO wheels- so i fully expected ALL high quality wheels to fit.. especially 2 and 3 piece-- when the works wheels showed up they werent even close to fitting-- well not returning wheels that forever to get here from japan and i guess i dont really NEED that big a brake .. after seeing some hondas and other JDM cars i soon learned they dont know how to make a wheel that truly clears brakes..
so ordered 11.75 rotors and got some thicker hats from Don at DP. got another set of struts (my last set from the hoard) and sectioned those for Koni race inserts- cut the ears off and made a 3/8" plate mount to bring the caliper in to clear the wheels-
all fits now and i have an extra set of struts with larger rotors and calipers already sectioned -- guess ill have to build another car , as also have rear brakes on same 12.2 rotors that clear the vto but not these works wheels..
so ordered 11.75 rotors and got some thicker hats from Don at DP. got another set of struts (my last set from the hoard) and sectioned those for Koni race inserts- cut the ears off and made a 3/8" plate mount to bring the caliper in to clear the wheels-
all fits now and i have an extra set of struts with larger rotors and calipers already sectioned -- guess ill have to build another car , as also have rear brakes on same 12.2 rotors that clear the vto but not these works wheels..
- Attachments
-
- orange-front-brakes.jpg (247.44 KiB) Viewed 5402 times
-
- orange-brake-wheel.jpg (108.55 KiB) Viewed 5402 times
Mike Gibson
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie
Datsun: 71 dime; 73 Z ; GT3 240
Other: 65 + 67 Mustang ; 03 murcie