S13 coupe drift car project

View and post your Nissan/Datsun project(s)
Post Reply
User avatar
icehouse
Posts: 3925
Joined: 17 Jul 2005 17:06
Location: Everett Wa

S13 coupe drift car project

Post by icehouse »

After autoxing and road racing for a while I think I'm going to go way way back and build a car drifting again. I had an S13 hatch in 1999, built it for street drifting (no legal ways to drift back then) until I almost lost my drivers license haha. I like autoxing and road racing but I want more local seat time and although autoxing is often but its just an arms race, along with only 12 minutes of seat time, I want to do something else. Club racing although cool looks boring after doing Lucky Dog Racing. I go and ride with my buddy Aaron sometimes. He is an amazing driver, who does the JDM style drifting. I'll post a picture of his rig. It's beyond fun to just ride in his rig. I gotta do it! I picked up this rig two years ago. I let my sister in law borrow it for 9 months while her Toyota RAV4 was being delayed for delivery. When I got it back I dug in and started building.

Although its very rust free it was a daily driver all it's life. Lots and lots of wear and dents. I bought it from a girl who bought it in 94 for her high school car. Her husband daily drove it until my buddy Squirl bought it and then I ended up getting it from him a little while later. It has a after market sun roof.... dealer installed :(.

Image


This is my goal. Rocket Bunny kit two tone with pink and grey. Tell me that doesn't look like a 90's 510!

Image


As I said the PO cared little about the upkeep on the car. It wore tires super bad and would automatically turn in at a certain steering angle. Super scary!!!! I've never seen a ball joint this bad. It fell apart when I took the front suspension off.

Image


Image


Image



While the car was at my brothers house to help them out I got a rear subframe from Danny and Datto dude down south. I reinforced it using a kit you can buy online and also reinforced the hubs based on what Aaron said sometimes fails. Then got I all powder coated. Removed the sub frame bushings. Going solid.

Image

Image

Image

hopefully that helps

Image

After powder coat.

Image

Image

Image

Ordered some Voodoo arms for the rear.

Image

All assembled along with a Xterra 4.6 gears. Welded of coarse. O yeah and 350Z axles.

Image


The front is next. Got these arms for it. Heat Maker arms. I also want to do the aggressive fast Japanese style drifting. The V8 lots of smoke but slow is not anything I'm interested in.

Image


I have a SR set aside for it. Along with a Z32 transmission, thanks Hobo (Ratsun dude who gave it to me)


My buddy Aaron's car. He's on the team Animal Style. They are so good!

Image
"People don't like it when shit doesn't match their rule of thumb." Sam
User avatar
icehouse
Posts: 3925
Joined: 17 Jul 2005 17:06
Location: Everett Wa

Re: S13 coupe drift car project

Post by icehouse »

I've been working on the engine bay lately. Did some tubs, seam welded it and deleted all the unneeded holes. I also made deflectors for rain in the inner fender wells. I remember way back in the day my engine bay was muddy because all the water would come threw the million holes in the car. Also I'm trying to keep the AC haha. hopefully it all works when I get the car back together.

Image

Image

Image


finally in the shop. It was outside for the mini tubs. That made it tough haha.

Image

Image


Pulled out all the interior but turns out I only need a roll bar and 1 door bar to be legal to tandem. So I can put the dash back in.

Image

Sealer down. Now I just need to do a little mud then I can paint it.

Image
"People don't like it when shit doesn't match their rule of thumb." Sam
510rob
Moderator
Posts: 5210
Joined: 09 Oct 2003 23:37
Location: Vancouver, BC

Re: S13 coupe drift car project

Post by 510rob »

gosh
72ultraorange
Supporter
Posts: 187
Joined: 11 Mar 2021 03:51
Location: Dallas, TX

Re: S13 coupe drift car project

Post by 72ultraorange »

icehouse - just saw this post -- AWESOME work! Can't wait to see this sideways! 8)
User avatar
icehouse
Posts: 3925
Joined: 17 Jul 2005 17:06
Location: Everett Wa

Re: S13 coupe drift car project

Post by icehouse »

Some progress on my drift build. Order some parts on Black Friday "sales". got a clutch, OEM rod and main bearings and a few seals. Stock bearings have some wear. Before I bang it off the limiter all weekend I wanted to swap in new bearings. If you run OEM bearings they are graded. So I had to check the bearings and figure out which ones to order. I also finished up the engine bay paint. Wow hardest engine bay I ever painted. It's passable. I was having real issues with all the AC in the way. The glitter required wet sanding.... Looks cool though!

Image


Image


Image
"People don't like it when shit doesn't match their rule of thumb." Sam
User avatar
shlammed
Posts: 33
Joined: 19 Dec 2022 12:38
Location: Ontario, Canada

Re: S13 coupe drift car project

Post by shlammed »

sweet. make some smoke
Not Now
Posts: 13
Joined: 10 Feb 2023 18:03
Location: Northern CA

Re: S13 coupe drift car project

Post by Not Now »

Coupes are my favorite, excited to fallow this build.
User avatar
KiKiIchiBan
Supporter
Posts: 515
Joined: 26 Feb 2014 23:46
Location: London, England

Re: S13 coupe drift car project

Post by KiKiIchiBan »

This has progressed rather nicely. Love it.
My P510 Bluebird SSS Coupe www.the510realm.com/viewtopic.php?t=26929

https://www.instagram.com/kikiichiban/
https://www.youtube.com/channel/UCBP1x8z2IBvfs-MQH2Gc73Q/featured
Post Reply